Premium FeNi

Next > >

Premium FeNi

Send Inquiry

Product Code : 01

Price And Quantity

Minimum Order Quantity
10 Piece
Price
Ask to Manufacturer INR

Product Specifications

Opening Pattern
AC
Voltage
220~250 Volt (v)

Product Description

Premium Cast Feni Electrode
We are providing this Premium Cast Feni Electrode that is known for its optimum strength and ductile nature. It is also known as medium coated nickel-iron alloy type electrode. The offered electrode is specially used for crack free welding of cast iron parts. Having excellent machinability, this electrode is also suitable for repairing as well as joining purposes. Apart from this, the provided Premium Cast Feni Electrode is available in different dimensions as per the clients’ requirements.

Key points:

Reduces welding stresses
Ideal for filling up deep cavities in casting
Also, can be used on high sulphur and phosphorous casting

Classification :

Approvals : AWS/A5.15 : E Ni Fe-CI

Description :

An electrode with Ferro-Nickel core wire designed to produce a higher, matching strength weld metal for joining malleable, nodular and S.G. iron. It is also suitable for joining these to mild, low alloy and stainless steels. The weld metal has good ductility and machineability. The electrode is less sensitive to hot cracking sometimes caused by impurities in castings, compared to pure nickel type electrodes.

Applications :

Welding of all types of cast irons.
Joining of cast iron to steels.
Can be used on high Sulphur/Phosphorous castings.
Machine bases, transmission housings, gear boxes, engine blocks, pump bodies etc.

Chemical Composition of Weld Al (wt.%)

C	Mn	Ni	Fe
0.8-1.5	0.9 max	55-60	Rem

Mechanical Properties of Weld Metal :

UTS	35-45 Kgf/mm2
Hardness	175-200 BHN

Current Conditions : AC / DC ( - )

Size (mm)	2.5 x 350	3.15 x 450	4 x 450	5 x 450
Amps	40-70	70-100	100-130	130-170

Welding Positions : F, H, V-up

Recommendations :

Use low currents, smallest possible size of electrode and lay small beads to avoid over heating.
Peen the weld heads whilst warm to reduce welding stresses.
Cool the welded part slowly under insulation.
Thicker sections may require preheat of approx. 150^oC - 300^oC for best results.

Trade Information